特点及优势
●点胶精度高：采用双伺服电机驱动，偏心螺旋杆送料，使双组份胶粘剂能够连续稳定输出
High dispensing accuracy: driven by dual servo motor, eccentric screw feeding, enabling continuous and stable output of two-component glue
●广泛适用的胶体粘度及吐胶量：调节电机转速和气体压力，可点涂不同粘度的胶体，并可快速改变吐胶量的大小
Widely applicable colloidal viscosity and glue amount: adjust motor speed and gas pressure, point jet glue with different viscosity, and quickly change the glue amount
●简单可调的双组份混合比：调节电机转速，可快速改变两种组份的混合比
Simple and adjustable two-component mixing ratio: adjust the motor speed to quickly change the mixing ratio of the two components
●定子适应性好：定子耐介质腐蚀，使用寿命长，大大降低用户的综合使用成本
Good adaptability of the stator: the stator is resistant to medium corrosion and has a long service life, which greatly reduces the user's comprehensive cost.
●容积式计量：真正的容积式输送，流量不受压力变化影响
Volumetric metering: true volumetric delivery, flow is not affected by pressure changes
●输出压力高：单泵输出压力20bar，双泵输出压力可达40bar
High output pressure: single pump output pressure up to 20 bar, double pump output maximum pressure up to 40bar
双组份螺杆泵技术参数2-Component Screw Pump Parameters
| 尺寸（长*宽*高）Dimensions (length * width * height) | 284.35mm x 184.6mm x 29mm |
| 产品型号 | Psv-flow600D |
| 重量Weight | 约2 kg |
| 接液部材质Wetted parts material | 不锈钢/耐腐蚀复合材料stainless steel / corrosion resistant composite |
| 电机规格Motor specifications | 伺服电机servo motor |
| 电机转速Motor speed | 1~120 r/min |
| 进料口Inlet | NPT 1/8 |
| 输入压力Input pressure | 0~6bar |
| 输出压力Output pressure | 0~20bar |
| 工作环境Working environment | 0~40℃ |
| 适用胶体粘度Applicable colloidal viscosity | 0~1000,000 cps |
| 吐胶量Glue Spitting amount | 0.06 ml/r |
| 胶体流量Colloidal flow | 0.06~7.2 ml/min |
| 最小吐胶量Minimum glue amount | 00.005 ml |
| 精度Precision | ±1% |
| 自密封Self-sealing | 2 bar |
| 储存条件Storage conditions | 干燥无尘dry and dustless，-10℃~+40℃ |
| 混合比Mixing ratio | 1:1~10:1 |
