钼丝钼块烧结炉
钼丝钼块烧结炉主要由晶闸管中频电源，氢保护系统，高温烧结炉体，自动温度控制系统，机械泵，真空系统，各种保护和给料机构组成，和放电机构。
钼丝钼块烧结炉主要技术参数
坩埚尺寸：Φ720×1600厚20
坩埚材料：钨
烧结额定温度温度：2350℃
工作温度：2300℃
电源电压：380V，50Hz，三相四线制
工作频率：1200〜1600Hz
电源：≤600KW
自动温度控制，测量，显示，自动记录
炉内的气体保护和流量可调，排气接口位于出口。
钼丝钼块烧结炉的主要结构
1.传感器的高度是1728毫米，电感器的内径为φ960毫米，并且它是绝缘的并且通过从坩埚钨绝缘氧化锆和AL2Q3。
2.加热元件采用钨-加热元件，通过感应加热将钨坩埚加热，然后加热待加热材料。钨镊子达到的技术指标如下：
2.1坩埚尺寸：Φ720×1600厚20
2.2密度≥83％D。
2.3钨管纯度：用FWP-1喷涂钨粉，纯度>99.9％。
3种耐火材料
3 .1顶部：由于进料方式为下部进料，因此顶部耐火砖由四片圆锥形制成，内层由耐火度为2600℃的氧化锆制成，作为耐火材料。外层是作为耐火材料的熔点为2050℃的AL2Q3。
4.炉体
炉体具有炉盖，观察镜，观察镜法兰，进气口，温度测量支架，炉壳，热电偶伸缩缸，测试口，防爆口，导电出口，真空出口，感应线圈等。
Molybdenum wire molybdenum blocksintering
he molybdenum wire molybdenum blocksintering is mainly composed of a thyristor intermediate frequency power supply, a hydrogen protectionsystem, ahigh temperature sintering body, an automatic temperature control system, a mechanical pump, avacuum system,various protection and feeding mechanisms, and a discharging mechanism.
Main technicalparameters ofmolybdenum wire molybdenum block sintering
crucible Size: Φ720×1600thick20
crucible Material: ungsten
Sintering maximum temperature:2350℃
Working temperature:2300℃
Power supply voltage:380V,50Hz, three-phase four-wire system
Working frequency:1200~1600Hz
Power supply: ≤600KW
Automatic temperature control, measurement, display, automatic recording
he gas protection and flow rate in the are adjustable, and theexhaust gas interfaceis arranged at the outlet.
Main structure ofmolybdenum wire molybdenum blocksintering
1. heheight of the sensor is1728mm, the inner diameter of the inductor is φ960mm, and itis insulated and insulatedfrom the tungstencruciblebyzirconium oxideandAL2Q3.
2. heheating elementadopts a tungsten-rhenium heating element, and the tungsten crucible is heated by induction heating, and then the material to be heated is heated.he technical indicators reached by tungsten tweezers are as follows:
2.1crucibleSize: Φ720×1600thick20
2.2Density ≥83% D.
2.3ungsten tube purity:ungsten powder was sprayedwithFWP-1, purity >99.9%.
3refractory materials
3.1top: Since the feeding method is the lower feeding, the top refractory brick is made of four pieces of conical type, and the inner layer is madeofzirconium oxidewith a refractoriness of2600℃as a refractory material.he outer layerisAL2Q3havingamelting point of2050° Cas a refractory material.
4.Furnace body
he body has a cover, a viewing mirror, an observation mirrorflange,an air inlet, atemperature measuring bracket, a shell, athermocouple telescopic cylinder, atest port, anexplosion-proof port, aconductive outlet, avacuum outlet, aninduction coilａnd the like.
/plus/view.php?aid=260
http://
哪个厂家的质量好?生产厂家西格马质量好，售后完善。
