中频感应烧结炉
一、工作原理
通过使用电磁感应原理，将强电流引入感应线圈，以在交变磁场中在电荷内部产生感应电流，从而将电荷加热到感应加热装置。
B，设备组成
1.中频电源KGPS-160KW-2.5KHz
2.水冷炉体
注意：水冷式炉体分为内缸和外缸，它们由整块钢板制成。内缸体由不锈钢制成，外缸体材料为Q235。喷头由标准喷头制成，内喷头为不锈钢，外喷头为Q235。制造方法和要求均符合GB150-89的规定
3.温度控制系统和外部操作柜。
4.工作平台（两侧都有楼梯）。
5.抽真空系统
C 。主要技术指标和功能
1.工作温度：2300℃
2.加热体材质：钨
3.加热体尺寸Φ370mm（内径）h = 700mm
4.中频电源
（1）电源电压：380v;50HZ;三相四线
（2）设计输出功率：160KW
（3）设计输出电压：750V
（4）设计工作频率：2500Hz
5.温度使用两个独立的温度测量系统，包括Wre5-26热电偶和非接触式光纤传感温度计。
6.采用氢气保护，流量可调，氢气出口设有排渣口。
C，安全保护功能
1.具有过流，过压，缺相，冷却水压力保护不足等问题。
2.具有过热保护功能。
3.具有断电报警功能。
4.具有氢防爆功能。
D，供水系统
1.水质参数。
水压≥0.2-0.4Mpa。
出水温度<55℃
进水温度<5-35℃
硬度CaO<10mg当量
酸-碱的pH = 7-8.5
悬浮固体<10mg / L
耐水性>2.5KΩ
铁含量<2mg
2.游泳池数量
由总功率乘以4-0.05取。如果空间有限，当水箱体积较小时，可以增加冷却塔。如果数量可以保证，*好在长江以南增加一个冷却塔。长江以北地区，可能没有适当考虑。
3.升降机
它应该是游泳池到设备的距离的1.5倍。
4.水流量
将总功率乘以0.04。
参考文章：
中频感应烧结炉的使用方法
Medium frequency induction sintering
A, working principle
By using the principle of electromagnetic induction, a strong current is introduced into the induction coil to generate an induction current inside the charge in the alternating magnetic field, thereby heating the charge to aninduction heatingdevice.
B,Equipment composition
1.Medium frequency power supplyKGPS-160KW-2.5KHz
2.Water-cooled body
Note: he water-cooled body is pided into inner and outer cylinders, which are made of a whole piece of steel plate. he inner cylinder body is made of stainless steel, and the outer cylinder material isQ235.he head is made of standard head, the inner head is stainless steel, and the outer head isQ235.he manufacturing methods and requirements are all in accordancewith the provisions ofGB150-89
3.emperature control system and external operation cabinet.
4.Work platform (with stairs on both sides).
5.Pre-vacuum system
C.he main technical indicators and functions
1.Working temperature:2300℃
2.Heating body material: tungsten
3.Heating body size Φ370mm(inside diameter)h=700mm
4.Intermediate frequency power supply
(1) Power supply voltage:380v; 50HZ;three-phase four-wire
(2) Maximum output power:160KW
(3)Maximum output voltage:750V
(4)Maximum operating frequency:2500Hz
5. hetemperature usestwo independent temperature measurement systems consisting ofWre5-26thermocouple and non-contact optical fiber sensing thermometer.
6. Itadopts hydrogen protection, the flow rate is adjustable, and the hydrogen outlet is provided with slag discharge port.
C, security protection function
1. Ithas over-current, over-pressure, phase loss, and insufficient cooling water pressure protection.
2.With over temperature protection.
3.With power failure alarm function.
4.With hydrogen explosion-proof function.
D, water supply system
1.Water quality parameters.
Water pressure ≥0.2-0.4Mpa.
Effluent temperature <55℃
Inlet water temperature <5-35℃
HardnessCaO<10mgequivalent
Acid-baseph = 7-8.5
Suspended solids <10mg/L
Water resistance >2.5KΩ
Iron containing <2mg
2.Pool volume
Multiplied by the total power4-0.05take.If space is limited, when the small tank volume, can be added cooling towers.When the volume can be guaranteed, it is better to add a cooling tower to the south of the Yangtze River.North of the Yangtze River, may not be considered properly.
3.Water lift
It should be1.5timesthe distance from the pool to the equipment.
4.Water flow
Multiply the total power by0.04.
Reference article:
Methodofusingmedium frequency induction sintering
http://
哪个厂家的质量好?生产厂家西格马质量好，售后完善。
