品牌：RETZ/我们一直致力于流体控制和测控领域的持续创新，始于2005……一劳永逸，事实证明RETZ角座阀工作寿命超过一百万次 Once and for all, it has been proven that the RETZ angle seat valve has a service life of over one million times
气动角座阀用于短时间频繁启动,反应灵敏，大流量，无噪声、无水锤,保持高流速,能够节省空间,它采用气动执行机构来操作的导向角座阀来实现开关 The pneumatic angle seat valve is used for frequent start-up in a short time, with sensitive response, high flow rate, no noise, no water hammer, maintaining high flow rate, and can save space. It uses a guided angle seat valve operated by a pneumatic actuator to achieve opening and closing
进口卡箍式气动角座阀工作原理 Working principle
在非工作的状态时，由于弹簧力作用，阀门常闭（开）
当执行器活塞呗压缩气体作用时，阀门打开（关闭）
进口卡箍式气动角座阀特点Characteristics of pneumatic flange angle seat valve
自动调节双层填料密封盖Self-adjusting,double packing glands.
加长防锤形导向和防尘密封圈Extended spindle guideand wiper seal.
易安装，汽控接口可在360°上任意选定位置Easy to install Motor control interface on the 360°Random designation position
无水击作用(流向阀座下)Water hammer-free(Flow below seat)
比截止阀高50%的流速 50% higher flow ratesthan the Global valves
配有长寿活塞环的免修执行器 Maintenance-free actuatorWith long-life piston ring
开启时无振动，比普通阀减少40%的用气量 Shock free opening With 40% less alr consumption
进口卡箍式气动角座阀参数
阀体材质：304/316
气缸材质：PAC（聚酰胺）、304
阀芯密封：PTFE、FKM
阀门的工作压力应位于 0~16/25Bar ，（蒸汽介质在 180℃C时，工作压力为0~10 Bar)
介质温度∶ -10℃ ~180℃
介质粘度∶≤600cst（mm²/s）
典型应用--
食品和饮料流水线 Food and beverage
可控介质比如：空气，水，高达180℃蒸汽，碱性溶液和真空Processing industries control of mediumssuch as air, water, steam up to 180℃, lye,vacuum
纺织印染和漂白 Textile dyeing and bleaching
可控水，高达180℃的蒸汽，苏打液 Control of water, steam up to 180℃Corium hypochlorite
医院和制药工业消毒高压灭菌器Sterilizers and auto-claves for hospitals and the pharmaceutical industry
可控蒸汽高达180℃的水 Control of steam,hot water up to 180℃
洗衣 Laundries
可控水，蒸汽，洗涤剂 Control of water, steam, washing agents
工业洗涤设备和溶解设备 Control of solvents, steam, vacuum
可控溶剂，蒸汽和真空 Industrial washing equipmentand solvent recovery systems
机械制造 Machine tools
可控冷却液 Control of coolant agents
富林克致力于作为流体控制专家，负责中国地区RETZ产品的营销管理和服务，从而创造价值的企业，RETZ以“坚持更好的品质”为根本，以“持续实现具有创造性、高品质产品和服务的企业价值，为当今社会的繁荣作出贡献”为企业理念
