JT-6516精密齿轮式多轴攻牙机
JT-6516 Precision Gear Multi Axial Tester
◆回转一牙距的精密自动输送组合：
装置可替换的A、B齿轮配合A、B轴轴与主轴依牙距推进配合(以往没有这种装置)，这种组合有以下优点：
1.垂直稳定、**而安全：精密度相当高，丝攻在前进与后退时不必出力就能运转自如，而产制优良的加工物品，不会造成精细不同的螺纹产，对薄板的冲床加工制品或轻合金属，合成树脂等软质制品也能制成上乘的螺纹。品质不稳定或不佳现象产生。
[JT-6516精密齿轮式多轴攻牙机]
2.采用等距攻牙，工件不会往上跳。
3.采用等距攻牙，工件不用压紧，装夹简便、效率高
◆JT6516精密齿轮式多轴攻牙机可高速连续循环运转，坚固耐用：
采用特殊马达、电子按键，能耐用一千万转次。
◆本机型适合加工M4-M16螺纹孔。配合多轴器使用，可以加工M4-M12之间的螺纹孔攻牙作业。
JT-6516 Precision gear type multi-axis attack tooth machine features:
Precision automatic transfer combination of a tooth pitch:
The substitutable A and B Gears of the device are fully matched with the shaft of the A and B shaft and the spindle according to the tooth distance propulsion(there was no such device in the past). This combination has the following advantages:
1. Vertical stability, accuracy, and safety: The precision is quite high, and the silk attack can operate freely without having to work hard when moving forward and retreating. The production of fine processed items will not result in fine and different spiral production, and the punch of thin plates. Processing products or light metals, Soft products such as synthetic resins can also be made into perfect threads. There is no instability of quality or undesirable phenomena.
[ JT-6516 Precision Gear Multi-axle Tester]
2. Using equidistant teeth, the workpiece will not jump up.
3. Using equidistant teeth, the workpiece does not need to be pressed, and the clamp is simple and efficient.
<unk> JT6516 Precision gear type multi-axle attack tooth machine can operate at high speed and continuously, strong and durable:
With special motors and electronic keys, it can last 10 million turns</unk>
| 规格 | JT6516 |
|
| 主轴*大行程 | 65MM | |
| 旋径mm | 430 | |
| 螺牙直径mm | Φ5-Φ16 | |
| 头部上下动距mm | 300mm | |
| 主轴端至工作台面距离mm | 470mm | |
| 工作台尺寸mm | 340×340 | |
| 功率 | 3相 6P 750w | |
| 主轴转速（50HZ) | 505,285,155 | |
| 主轴转速（60HZ) | 620,340,190 | |
| 螺距mm | 0.7,0.8,0.9,1.0,12.5, | |
| 多轴*大攻牙 | M6×9轴，M8×4轴，M12×2轴 |
JT-JT6516精密齿轮式多轴自动攻丝机/攻牙机可配合多轴器进行多孔同时攻牙作业。
